People may assume that painting your house is an easy job especially the interior and anyone can do it. No doubt it is not that difficult but only when you get down to work you realize that the interior design and renovation company go through a lot of hassle before giving a top-notch painted house. There are many things that you should know before interior painting according to residential interior painting services and experts.
1. Color Test
The color which is looking good in someone else’s house or in the interior design and Renovation Company may not necessarily look good in your house or match your furniture and theme of your house. Before purchasing paints in bulk, purchase a little amount and do a test patch and then see whether it looks good in your house or not.
Measure the square foot of your walls and then calculate and purchase the paint in bulk. Make sure to purchase in ample quantity as you will have to do 2 to 3 coats. You can also get an idea from any interior design and renovation company.
3. Clean Up
One important thing is that paint does not set well on dirty and greasy walls. You should first clean up your wall thoroughly with soap and water or get a high-quality wall cleaner if your walls are really dirty and wipe them clean and then leave them to air dry for 24 hours. Also, clean the ceiling and remove any dust, mold or cobwebs from the ceiling before you start with the paint.
4. Sanding and Filling
Your walls go through a lot of wear and tear in all the years. So it is better to do all the prep work before you start the paint. Fill all the holes with cement so that there are no gaps after painting. Also, sand the walls to even them out and they do not look bumpy.
Once you are done with the sanding, it is necessary to apply a coat of primer as emphasized by residential interior painting services. If you are using an all in one paint with the primer then you will not need one. Primer smoothens and evens out the walls and also hides the imperfections and the previous paint of the walls. It will give a proper finish and look of the paint and the paint well.
6. Mix All Together
When you mix paint batch by batch, it will give a slightly different color every time which will become noticeable after drying. To avoid this, it is better to mix all the paint buckets in a gallon together so that it gives an even color on all the walls.
7. Edges and Corners
For a smooth finish, start with the corners and edges. Use a wide paintbrush to paint the edges, nooks, and corners. It will be easy to do the walls when you are done with the corners and edges. Remember to let the paint dry for 24 hours and then tape these edges and corners to get a straight and smooth paint.
8. Painting Technique
To get a smooth finish use a roller brush for painting the walls and paint only in one direction. Always keep your paint filled till half in the roller brush throughout the paint to get an even finish.
Let the paint dry for 24 to 48 hours before setting the furniture again and removing the taped edges. When you remove the tape, make sure to slight cut it as scraping may cause the paint to get scraped off as well. End it with a coat of sheen for a super smooth effect.
Moreover, if all this is bit complicated for you, you can always hire interior design and renovation company to do that for you.